Water Heater Repair Frisco

GPS Plumbing understands the importance of water heater repair. We are rated as one of the best in Frisco, TX.  It is a necessity in every home, but what if the water heater breaks down for some reason? You will have to use the ice-cold water all the time until you replace the unit. However, if you contact us, we can repair the hot water heater in a jiffy so that you don’t have to spend hundreds on a new unit or stay without hot water for days. We offer same day service for water heater repair Frisco. So call us today!

Call us for water heater repair Frisco

We often advise our Frisco customers not to take any symptom of the water heater’s damage lightly. Regular wear and tear will reduce the efficiency of any electrical gadget, but you need to know the symptoms first so that you can contact us at the earliest. Once you call us, we will send a plumber to your house immediately for water heater repair in Frisco. Some of the repair services that we offer are:

  • Restoring faulty burners – Most gas-powered hot water heaters have burner problems similar to the ones that the gas furnaces face. Dirt or rust in the burner often causes trouble while heating the water. This leads to several other issues such as a blockage in the line or increased electricity bills. We don’t want you to try fixing this problem alone. Call us, and we will send a team to look into the matter. Our plumbers are always equipped with the latest tools that can unclog the burner and remove the rust bringing back the water heater to its usual efficiency.
  • Fixing damaged dip tubes – Dip tubes are crucial parts of hot water heaters. If they malfunction, the water heater will soon stop working. However, a quick repair can fix the damage instantly. The dip tube is responsible for heating the water in the tank. When it is damaged, you get lukewarm water. One of our plumbers will open the water heater to check the condition of the dip tube. If it is still in a condition to repair, they will fix it. However, if the dip tube is damaged beyond repair, they will replace it with a new one.
  • Replacing heating elements – There are two heating elements in the tank that increases the water temperature. Even if one of these elements fails to work correctly, the hot water heater will not operate at its full efficiency. Don’t worry; our technicians are experts at identifying the problem with the heater. They will disassemble the heater, fix the damaged part, and reassemble everything again.

Why hire us for water heater repair in Frisco, TX?

Our company believes in providing high-quality hot water repair services. We don’t compromise on the quality of the products we use to repair these units. So, you can expect top-notch service whenever you hire us. We provide:

  • Competitive prices – Our consistent success is due to two reasons: exceptional service and low prices compared to other companies. We will provide an estimate depending on the problem your water heater is facing. You can compare the rates with any other company, and we are confident that you won’t find anyone who can match the quality of the service and price that we do.
  • Same-day appointments – We understand how problematic it is not to have hot water when you need it the most. That’s why we provide same day appointments so that you don’t have to wait for a long time before the hot water starts flowing through the taps again.

Signs of a damaged water heater

Nothing lasts forever in this world, and your hot water heater repair is not an exception. Almost every other electrical gadget can malfunction after a few years, and if your water heater starts to give out lukewarm water instead of hot water, it means you need to contact an experienced plumbing company to repair the unit. That is the first sign of the water heater slowly deteriorating in quality. But most people don’t realize the symptoms until it is too late. So, here are a few signs that you need to keep in mind that indicate a damaged water heater:

  • Bulging tank – This is a tricky symptom that most people fail to notice because they are busy utilizing hot water. If you see the hot water heater bulging out slightly, don’t hesitate to call us immediately. It is a clear indication that the tank’s pressure valve is not functioning correctly. This is a dangerous problem and should be dealt with as quickly as possible because it can result in the water heater bursting soon. The bulging tank looks similar to swollen feet or hands. Just as they become larger than usual, the hot water tank will also bulge out.
  • Corrosion – Corrosion is very easy to locate on a hot water heater. If there is corrosion in the hot water heater, it will also affect the pipes and fittings associated with the unit. Brownish chunks on the pipes and water heaters are signs of corrosion. At our company, we have expert plumbers who can replace the necessary parts so that the hot water heater provides corrosion-free water.
  • Hike in electric bills – Do you see a spike in the monthly electricity bill even if you haven’t installed any additional new gadgets lately? This unexplained increase in electricity bills can be due to the heating costs from the water heater. It means the unit is losing its efficiency, and it’s time for a much-needed tune-up. Sometimes the dip tube in the heater breaks. This is one of the reasons why there is a sudden surge in electricity consumption. The heater has to apply more pressure to emit hot water in the absence of the dip tube. Our plumber will identify the problem and will try to repair the dip tube quickly.
  • Noisy tank – Is your hot water heater making a rumbling noise whenever you switch it on? If the tank whines, gurgles, bangs, or creaks, it means there are sediments accumulated inside the heater. That is why occasional flushing of the heater is necessary to improve the life of the tank. Many homeowners try to watch videos of how to flush a hot water heater alone, but we advise you to leave it to the professionals. It requires several safety measures that you may not be aware of. Sometimes the shut-off valve doesn’t work, and this can cause the tank to make a rumbling sound.

When our plumbers are at work, they always switch the electricity off so that there are no chances of short circuits. They will allow the water to cool down before flushing. If they find that the shut-off valve is malfunctioning, they will replace it with a better one so that it lasts for a long time.

Why water heaters fail

Now that you already know the symptoms of hot water heater damage, let’s take a look at some of the reasons why these units don’t work properly. We offer same day service for water heater repair Frisco.

  1. High water pressure – High water pressure is not only problematic for the hot water heater but also for the pipes and fittings. Every water heater has an overflow pipe, and if that pipe is leaking, it is time to check the water pressure. Excessive pressure will deteriorate the heater faster than you can imagine. We can fix this problem by controlling the water pressure. Ideally, the pressure shouldn’t be more than 80 psi. We will try to bring the pressure down, and even if the pressure and temperature relief valve don’t work to perfection, our plumbers will replace that part.
  2.  Internal rust – Hot water heaters contain sacrificial anodes made of highly active metal rods. These prevent the entire unit from corroding. However, it is essential to replace these rods occasionally so that they don’t build up internal rust. Anode rods last for years, but it is always wise to inspect them from time to time. We can take the responsibility of periodic checkups so that there are no chances of corrosion inside the heater. Worn down anodes can be the source of rust in the water heater, and that’s why they need immediate replacement.
  3. Corrosive fumes – Water heaters draw in air for combustion. But, if the air quality is poor, it can cause a lot of problems, especially if the air is corrosive. This will not only corrode the tank but will also make it non-functional. We have often come across houses where homeowners keep bleach and ammonia in their bathrooms. They are the biggest enemies of hot water heaters. We can always fix the corrosion, but unless you keep the ammonia and bleach in some other place in the house, no one can save the heater.
  4. Sediment deposits – Minerals from the water usually separate and settle down at the bottom of the tank when it is heated. The reason why this problem is so critical is that you can’t understand how much sediment is building inside. It will slowly collect for months, and eventually deteriorate the efficiency of the water heater. If you are living in an area where hard water is common, it is better to call us and get the water heater checked now and then. Hard water has a lot of minerals that can accumulate inside the water heater. If we think that the sediment is too much, we will flush the heater to improve its efficiency. Ideally, it is best to flush the hot water heater at least once a year.
  5. Wrong size of the water heater – Many people try to save money initially while purchasing a hot water heater. They usually invest in a small water heater but have a large family. This leads to the overuse of the water heater, and that is one of the reasons for the breakdown of the unit. You can call us before purchasing a water heater so that our plumbers can recommend the best size of the water heater that will suit your family.

Get 24 x 7 emergency water heater repair service

Sometimes hot water heaters make unusual sounds that terrify homeowners. Apart from noises, if the water heater starts to leak or overflow without any reason, it is impossible to stay calm. Give us a call without wasting time. We are there to provide 24 x 7 emergency services because we know how frightening the sounds are.

Hot water heaters provide much-needed comfort, especially during winters. But, if they don’t work correctly, it is better not to try anything alone. Contact us so that we can fix the problem with the water heater because we don’t want you to stay in any discomfort.